Parameters General Module type: Analog input electronic module (Modicon TM5) Number of input channels: 4 Supply voltage: 24 V DC (connected to the 24 V DC I/O power segment) Power consumption: ~46 mA at 24 V DC; ~2 mA at 5 V DC TM5 bus; power dissipation ~1.11 W max Weight: ~25 g Protection rating: IP20 Analog Input Characteristics Input signal types: • Voltage differential: ±10 V DC • Current differential: 0–20 mA and 4–20 mA Input impedance: ≥ 20 MΩ (voltage); ≤ 400 Ω load (current) Resolution: 12 bits with sign for voltage, 12 bits for current Measurement resolution: ~2.441 mV for ±10 V; ~4.883 µA for 0–20 mA/4–20 mA Sample duration: ~400 µs without filtering, ~1 ms with filtering Accuracy & Stability Typical measurement error: < 0.08 % of full scale at 25 °C (voltage and current) Temperature drift: ~0.006 %/°C (voltage), ~0.009 %/°C (current) Non‑linearity: < 0.025 % FS (voltage), < 0.05 % FS (current) Common‑mode rejection: ≥ 70 dB DC and at 50 Hz Isolation & Diagnostics Isolation between analog channels and TM5 bus: ~500 Vrms AC (modules share common ground via bus) No isolation between individual channels Status LEDs indicate power, fault conditions, and per‑channel input status (overflow/underflow, conversion running) Compatibility & Mounting Compatible with Modicon M258 logic controller and Modicon LMC058 motion controller Installed on TM5 analog/mixed I/O bus base and mounted on 35 mm DIN rail Conforms to IEC 61131‑2, UL 508, CSA and other industrial standards Summary Table (selected parameters) Module type: Analog input (Modicon TM5) Supply voltage: 24 V DC Channels: 4 differential inputs Input ranges: ±10 V, 0–20 mA, 4–20 mA Resolution: 12 bits (voltage with sign) Sampling time: 400 µs/1 ms Accuracy: < 0.08 % FS Isolation: 500 V AC to bus