(Technical Parameters) Parameter Category Description / Value Product Reference LC1DT80AM7 Brand / Range Schneider Electric / TeSys D (Reversing Starter) Type Packaged Reversing Contactor Assembly (2 x Contactor + 1 x Overload Relay) Component Specifications Contactor Ratings 2 x LC1D80 Contactors Rated Operational Current (Ie) 80 A per contactor at AC-3, 400V Motor Power at AC-3 37 kW at 400V, 50/60Hz Rated Operational Voltage (Ue) Up to 690 V AC Thermal Overload Relay Integrated LRT/LR2-D type relay (exact model depends on assembly). Adjustable current setting range. Overload Relay Functions Phase loss sensitivity, automatic or manual reset selection. Control Coil AC Coil (A). The M7 indicates a specific Wide Voltage Range Coil. Common voltages: 110V, 230V, 400V, etc. Exact voltage must be confirmed. Interlocking Mechanical and Electrical Interlock to prevent simultaneous closure of both contactors. Electrical Durability Millions of operations (dependent on load category). Standards & Approvals Compliance Standards IEC/EN 60947-4-1, IEC/EN 60947-4-2, UL 60947-4-1, CSA, etc. Connection & Mounting Main Terminals Screw terminals for power connections. Control Terminals Screw terminals for coil and interlock wiring. Mounting Fixed mounting on a back panel. Accessories Can typically be equipped with additional auxiliary contact blocks. Physical Data Dimensions Larger than a single contactor due to the assembly (consult datasheet for exact). Net Weight Approximately 2.5 - 3.5 kg (varies).