Specifications: Type: Molded Case Circuit Breaker (MCCB) Number of Poles: 4P (4 poles) – Suitable for three-phase systems with neutral (4-wire systems) Current Rating: 63A Rated Voltage: Typically 415V (for three-phase systems) Rated Frequency: 50/60 Hz Tripping Characteristics: Thermal Protection: Provides protection against overload conditions, disconnecting the circuit to prevent overheating and damage to equipment. Magnetic Protection: Offers instantaneous disconnection during short-circuit conditions, safeguarding the circuit from fault currents. Adjustable Protection Settings: The thermal and magnetic protection settings can be adjusted to match specific needs for various applications. Residual Current Protection (RCD): Available in specific configurations, this feature ensures protection from earth leakage currents, providing safety for personnel and reducing fire hazards. Breaking Capacity: 25 kA at 415V (maximum fault current the breaker can safely interrupt) Protection Features: Overload Protection: Disconnects the circuit when sustained overcurrent conditions are detected, preventing overheating and reducing risk to equipment and wiring. Short-Circuit Protection: Provides instantaneous protection against short-circuit faults, ensuring the system is not damaged by high fault currents. Earth Leakage Protection: In certain configurations, the breaker offers residual current protection (RCD), disconnecting the circuit if leakage currents exceed safe levels. Manual Reset: After a fault is cleared, the breaker can be manually reset, restoring the circuit to normal operation. Compliance: Complies with IEC 60947-2, ensuring it meets international standards for low-voltage circuit protection.