Specifications: Type: Miniature Circuit Breaker (MCB) Number of Poles: 2P (2 poles) – Suitable for single-phase or two-wire systems. Current Rating: 10A Rated Voltage: Typically 230V (for single-phase systems) Rated Frequency: 50/60 Hz Tripping Characteristics: Type D (D10A): The breaker trips when the current exceeds 10-20 times the rated current, making it suitable for circuits with moderate inrush currents such as motor circuits and circuits with inductive loads. Breaking Capacity: Typically 6 kA at 230V (maximum fault current the breaker can safely interrupt) Protection Features: Overload Protection: Disconnects the circuit if the current exceeds the rated value for a prolonged period, protecting the circuit from overheating and potential damage. Short-Circuit Protection: Provides instantaneous disconnection when a short circuit is detected, preventing further damage to the electrical system and equipment. Manual Reset: After tripping due to an overload or short circuit, the breaker can be manually reset once the fault is cleared. Compliance: Complies with IEC 60898-1 for low-voltage circuit protection and IEC 60947-2 for electrical installations.