Specifications General Product Type: Time delay auxiliary contact block Series / Family: TeSys D accessory Model: LADR4 Contact Configuration: 1 × Normally Open (NO) + 1 × Normally Closed (NC) Time Function: Off‑delay (contacts operate after coil is de‑energized) Time Delay Range: Adjustable from 10 to 180 seconds Mounting: Front clip‑on mounting onto compatible contactors Connection Type: Screw clamp terminals Electrical Ratings Rated Operational Voltage (Ue): Up to 690 V AC (25 – 400 Hz) Rated Insulation Voltage (Ui): Typically 690 V AC (IEC) Conventional Free‑Air Thermal Current (Ith): 10 A at 60 °C for control circuit Utilization Category: AC‑15 / DC‑13 (control circuits) Rated Contact Current: Up to 10 A at 690 V AC Maximum Switching Voltage: Up to 250 V depending on utilization Minimum Switching Current: ~5 mA Minimum Switching Voltage: ~17 V Protection, Durability & Compliance Mechanical Durability: Up to 5 million operations Electrical Durability: ~100,000 operations at rated load Protection Class: IP20 (front face) Standards Compliance: IEC 60947‑5‑1, UL 60947‑5‑1, CSA C22.2 No. 60947‑5‑1, CE, CSA, CCC, EAC, RoHS/REACH Operating Temperature: Approximately ‑20 °C to +60 °C Storage Temperature: ~‑60 °C to +80 °C Physical & Mechanical Compact Design: Minimal panel space required Compatibility: Designed for use with Schneider TeSys D / TeSys F contactors and control relays (e.g., LC1D, LC1F series) Front Mounting: Clip‑on installation on the contactor frame