Specifications General Product Family: TeSys D (Schneider Electric) Device Type: Electromagnetic contactor Model: LC1D95M7 Number of Poles: 3 (three normally open contacts) Application: AC motor control and general load switching Utilisation Categories: AC‑1, AC‑3, AC‑4 Electrical Ratings Rated Operational Current (Ie): 95 A (power circuit) Rated Operational Voltage (Ue): ≤ 690 V AC Control Coil Voltage: 220 V AC, 50/60 Hz Rated Insulation Voltage (Ui): 690 V AC Rated Impulse Withstand Voltage (Uimp): 6 kV Conventional Free‑Air Thermal Current (Ith): 95 A Minimum Switching Current: ~5 mA (signal loop) Motor & Load Performance Motor Power Ratings (AC‑3 Load Duty): Approx. 22 kW @ 220‑240 V AC Approx. 37 kW @ 380‑415 V AC Approx. 55 kW @ 500‑600 V AC Resistive Load Capability: Suitable for AC‑1 resistive loads up to rated current Mechanical & Operational Operating Mechanism: Electromagnetic coil actuation Control Coil Power Consumption: Standard for 220 V AC coil Operating Frequency: Up to several thousand operations per hour Mechanical Life: Millions of mechanical cycles Electrical Life: High contact life under rated load conditions Auxiliary Contacts & Accessories Auxiliary Contact Options: Optional auxiliary blocks (e.g., 1 NO + 1 NC) available for control logic Mounting: DIN‑rail or panel mounting with standard accessories Environmental Ambient Operating Temperature: Typical industrial range Pollution Degree: Suitable for industrial environments Protection Level: IP20 (front) Vibration & Shock Resistance: Designed for industrial use