Parameters Brand: Schneider Electric Series: PowerLogic PM5000 Model / Part Number: PM5560 Product Type: Multifunction Power & Energy Meter Application: Energy monitoring, power measurement, power quality analysis Display: Backlit graphical LCD (128 × 128 pixel) Measured Parameters: Voltage (phase‑to‑phase & phase‑to‑neutral) Current (per phase & neutral) Active, Reactive & Apparent Power Active, Reactive & Apparent Energy (bi‑directional) Power Factor & Frequency Harmonics & THD up to 63rd order Min/Max and demand values with timestamp Accuracy: Active Energy: Class 0.2S (IEC 62053‑22) Reactive Energy: Class 2 (IEC 62053‑23) Voltage/Current/Power: high‑precision True RMS Control Power Supply: AC: 100–480 V AC ±10% (45–65 Hz) DC: 125–250 V DC ±20% Voltage Measurement Range: 20–690 V AC L‑L (Wye) or 20–600 V AC L‑L (Delta); 20–400 V AC L‑N Current Input: Nominal 1 A or 5 A CT secondary; measured range ~50 mA–10 A Frequency: 45–65 Hz; supports 50/60 Hz networks Digital I/O: 4 digital inputs, 2 digital outputs (configurable) Communication Interfaces: RS‑485 (Modbus RTU/ASCII); Ethernet (Modbus TCP/IP, BACnet/IP, EtherNet/IP; variant dependent) Data Logging: On‑board memory for events, alarms, and parameters with configurable intervals Environmental: Operating Temperature: –25 °C to +70 °C Humidity: 5 %–95 % non‑condensing Pollution Degree: 2 Protection: Front display IP54 (upgradeable); meter body IP30 Mounting: Flush panel mount (96 × 96 × 72 mm) Memory: ~1.1 MB internal memory for logging parameters Standards Compliance: IEC 61557‑12, IEC 62053‑22/23, IEC 61010‑1, EMC & safety standards Weight: ~450 g (varies by configuration)