Key Features:
8-Point Analog Inputs: Capable of processing up to 8 independent analog inputs.

High Accuracy: High-resolution analog-to-digital conversion ensures precise measurement of analog signals.

Flexible Communication: Designed for use with the Mitsubishi R Series PLC and remote I/O systems.

Wide Input Range: Capable of handling a variety of analog input signal types, such as voltage, current, and thermocouple signals.

Compact Design: Space-efficient module that can be easily integrated into existing control panels or automation systems.

Real-Time Data Acquisition: Provides real-time acquisition of analog data for precise control and monitoring.

Built-in Isolation: The module includes isolation between the input channels and the system to protect against electrical noise and voltage spikes.

Enhanced Signal Processing: Allows for filtering and scaling of input signals for better data processing within the PLC system.

Technical Specifications:
Model: R60AD8-G

Type: 8-point Analog Input Module (for Remote I/O)

General Specifications:
Input Channels: 8 analog input points (channels)

Input Type:

Voltage Inputs: Typically 0 to 10 V DC or ±10 V DC

Current Inputs: Typically 4 to 20 mA

Thermocouple Inputs: Compatible with Type K and Type J thermocouples (if configured)

Input Resolution: 12 bits (for higher precision and accuracy)

Sampling Rate: 100 ms per channel (depending on the configuration)

Voltage Input Specifications:
Input Voltage Range: 0 to 10 V DC, ±10 V DC

Input Impedance: 10 MΩ (minimum) to ensure high accuracy

Accuracy: ±0.2% of input range (typical)

Current Input Specifications:
Input Current Range: 4 to 20 mA

Input Impedance: 250 Ω (minimum) for current-to-voltage conversion

Accuracy: ±0.2% of input range (typical)

Thermocouple Input Specifications:
Thermocouple Types Supported: Type K, Type J

Temperature Measurement Range: -200°C to +1372°C (Type K), -40°C to +750°C (Type J)

Accuracy: ±1.5°C (for Type K), ±2°C (for Type J)

Communication and Power:
Interface: Compatible with Mitsubishi R Series Remote I/O system, can be connected to a MELSEC Q or L series PLC.

Power Supply: Powered from the R Series Remote I/O Base, requiring a 24V DC supply.

Power Consumption: Approximately 1.5 W (depends on the number of active input channels).

Environmental Specifications:
Operating Temperature Range: 0°C to 55°C (for normal operation)

Storage Temperature Range: -20°C to 70°C

Operating Humidity: 10% to 90% RH (non-condensing)

Physical Specifications:
Mounting Type: DIN Rail or panel-mount for ease of installation in control panels.

Dimensions:

Width: 72 mm

Height: 90 mm

Depth: 65 mm

Weight: Approx. 200 g