General Specifications
Model: EV1000-2S0015G-C8

Type: 2-channel industrial vibration monitor

Mounting: DIN rail (35mm)

Compliance: ISO 10816, API 670

Input Parameters
Channels: 2 independent vibration monitoring inputs

Sensor Compatibility:

Velocity sensors (4-20mA)

Accelerometers (IEPE/±10V)

Proximity probes (eddy current)

Frequency Range:

Standard: 10Hz-1kHz (velocity)

Extended: 1Hz-10kHz (acceleration)

Measurement Ranges:

Velocity: 0-20mm/s (default), up to 50mm/s

Acceleration: 0-10g (selectable)

Signal Processing
Sampling Rate: 1kHz per channel

Dynamic Filters:

Adjustable high-pass/low-pass

Bandpass for frequency-specific monitoring

Alarm System:

Dual-stage (Warning/Danger) per channel

Adjustable delay timers (0-10s)

Output Specifications
Relay Outputs:

4 SPDT relays (2 per channel)

250VAC/5A contact rating

Analog Outputs:

2 isolated 4-20mA (1 per channel)

±0.1% accuracy

Communication:

RS-485 Modbus RTU (standard)

Optional Profibus DP

Electrical Specifications
Power Supply: 24VDC ±10% (18-32VDC range)

Power Consumption: <4W

Isolation: 1500V channel-to-channel

Environmental Ratings
Operating Temp.: -20°C to +70°C

Protection: IP20 (panel mount)

Certifications
Safety: CE, UL

EMC: EN 61326-1

Hazardous Area: ATEX Zone 2 (optional)

Mechanical Specifications
Dimensions: 100×110×60mm (W×H×D)

Weight: 400g

Termination: Screw terminals (2.5mm² max)

Typical Applications
Turbine monitoring

Compressor protection

Critical pump systems

Power generation equipment