1. General Information
Manufacturer: EPRO (Baker Hughes)

Model No.: EV2000-4T0075G/0110P-10-01

Type: Multi-parameter Monitoring Module (Vibration + Temperature + Process)

Application: Comprehensive machinery protection for critical rotating equipment

2. Monitoring Capabilities
Vibration Monitoring:

Channels: 4 independent inputs

Sensors Supported: Velocity sensors (4-20mA), IEPE accelerometers

Measurement Range: 0-25.4 mm/s (velocity), 0-50 g (acceleration)

Frequency Range: 10Hz-10kHz (with 1kHz-10kHz band for bearing defects)

Temperature Monitoring:

Channels: 4 RTD inputs

Sensor Type: Pt100 (3/4-wire)

Range: -30°C to +300°C

Accuracy: ±0.25% of reading

Process Monitoring:

Channels: 2 analog inputs (4-20mA/0-10V)

Parameters: Pressure, differential expansion, etc.

3. Outputs & Communication
Analog Outputs:

6 x 4-20mA (assignable to any parameter)

Relay Outputs:

12 x SPDT (250VAC/30VDC, 5A)

Configurable as Warning/Danger/Process alarms

Communication:

Dual Ethernet (10/100/1000BASE-T)

PROFIBUS DP

Modbus TCP/RTU

OPC UA

4. Advanced Features
Signal Processing:

Real-time FFT analysis

Waveform capture

Orbit analysis (with phase input)

Protection Functions:

Programmable trip logic

Dynamic alert thresholds

First-out annunciation

5. Power Supply
Input Voltage: 85-264VAC, 47-63Hz or 24VDC

Power Consumption: 15W typical

Backup: Supercapacitor for ride-through

6. Environmental Specifications
Operating Temperature: -40°C to +70°C

Humidity: 5-95% non-condensing

Enclosure: IP66 (front), IP54 (overall)

7. Certifications
Safety: UL 61010-1, IEC 61508 SIL2

EMC: EN 61326-1

Hazardous Areas: ATEX/IECEx Zone 2

8. Mechanical Specifications
Mounting: 19" rack or panel

Dimensions: 177 x 132 x 55 mm (1U height)

Weight: 1.8 kg

9. Typical Applications
Steam and gas turbine monitoring

Compressor train protection

Generator condition monitoring

Critical pump vibration analysis

10. System Integration
Compatible with EPRO MMS6000 systems

Supports integration with:

DCS systems

PLCs

Asset management software

Configuration via EPRO Engineering Studio