PR6423/010-031_EPRO_PRODUCT_Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司

Key Specifications: Range: 0-3.1mm | Sensitivity: -7.87V/mm Response: 0-10kHz | Resolution: 0.1µm Output: -2 to -18V DC (linear to gap) Robust Construction: ✓ 8mm stainless steel probe (M10×1 thread) ✓ IP67 environmental protection ✓ -30°C to +120°C operation (180°C with HT cable) Installation Ready: • 5m integral cable • -24VDC power supply • AISI 4140 steel target required (≥12mm) Typical Applications: Turbine/compressor shaft vibration Rotor axial position monitoring Bearing wear detection Certified Compatibility: • EPRO MMS6000 systems • CE/RoHS compliant

400-887-3214

DESCRIBE

Measurement & Performance
Type: Eddy Current Displacement Sensor

Measuring Range: 0–3.1 mm (0.122 in)

Sensitivity: -7.87 V/mm (±5%)

Linearity: ±1% of full scale

Frequency Response: 0–10 kHz (±3 dB)

Resolution: 0.1 µm

Electrical Characteristics
Output Signal: -2 to -18 V DC (gap-proportional)

Power Supply: -24 V DC (±10%)

Current Consumption: ≤12 mA

Cable Length: 5 m (standard, integral cable)

Mechanical & Environmental
Probe Diameter: 8 mm (0.315 in)

Thread Size: M10×1

Housing Material: Stainless Steel 316

Protection Class: IP67

Operating Temp: -30°C to +120°C (up to +180°C with HT cable)

Storage Temp: -40°C to +160°C

Target Requirements
Material: Ferrous steel (AISI 4140 recommended)

Minimum Target Size: 1.5× probe diameter (≥12 mm)

Compatibility & Certifications
Compatible with: EPRO MMS6000 monitoring systems

Standards: CE, RoHS compliant

Typical Applications
Shaft vibration monitoring (turbines, compressors)

Rotor position measurement

Bearing condition monitoring

SERVICE HOTLINE 400-887-3214

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： 615739355

Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司吉ICP备2024020526号-1