PR6423/012-010_EPRO_PRODUCT_Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司

Core Specifications: Range: 0-10mm | Sensitivity: -8.0V/mm Response: 0-10kHz | Resolution: 0.1μm Output: -2 to -18V DC (linear to gap) Robust Design: ✓ 8mm probe (M10×1 thread) ✓ 316 stainless steel housing ✓ IP67 protection rating ✓ -30°C to +120°C operation (180°C with HT cable) Installation Notes: • Requires AISI 4140 steel target (≥12mm) • 5m integral cable • -24VDC power supply Typical Applications: Turbine/compressor shaft monitoring Rotor position measurement Bearing condition analysis Compatibility: • EPRO MMS6000 systems • CE/RoHS certified

400-887-3214

DESCRIBE

Measurement & Performance
Type: Eddy Current Displacement Sensor

Measuring Range: 0–10 mm (0.39 in)

Sensitivity: -8.0 V/mm (-200 mV/mil)

Linearity: ±1% of full scale

Frequency Response: 0–10 kHz (±3 dB)

Resolution: 0.1 µm

Electrical Characteristics
Output Signal: -2 to -18 V DC (gap-proportional)

Power Supply: -24 V DC (±10%)

Current Consumption: ≤12 mA

Cable Length: 5 m (standard, integral cable)

Mechanical & Environmental
Probe Diameter: 8 mm (0.315 in)

Thread Size: M10×1

Housing Material: Stainless Steel 316

Protection Class: IP67 (dust/waterproof)

Operating Temp: -30°C to +120°C (up to +180°C with HT cable)

Storage Temp: -40°C to +160°C

Target Requirements
Material: Ferrous steel (AISI 4140 recommended)

Minimum Target Size: 1.5× probe diameter (≥12 mm)

Compatibility & Certifications
Compatible with: EPRO MMS6000 & other monitoring systems

Standards: CE, RoHS compliant

Typical Applications
Shaft vibration monitoring (turbines, compressors)

Rotor axial/radial position measurement

Bearing wear detection & predictive maintenance

SERVICE HOTLINE 400-887-3214

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： 615739355

Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司吉ICP备2024020526号-1