PR6423/005-010_EPRO_PRODUCT_Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司

Key Features: Eddy Current Principle: Measures distance between the sensor tip and conductive targets. Operating Range: Typically 0–10 mm (adjustable based on setup). Output: Analog signal (e.g., –2 to –18 VDC proportional to gap distance). Robust Design: Suitable for harsh environments (high temps, oil, steam). Compatibility: Works with EPRO monitoring systems (e.g., MMS6000).

400-887-3214

DESCRIBE

Key Parameters
Electrical Specifications
Sensitivity: 8.0 mV/µm (factory-calibrated, -010 suffix)

Measurement Range: 0 to 1.0 mm (1000 µm)

Output Signal: -2 to -20V DC (linear to gap distance)

Frequency Response: 0 to 10 kHz

Power Supply: -24V DC ±10%

Mechanical & Environmental
Probe Diameter: 8 mm

Thread Size: M10×1

Operating Temperature:

Sensor Head: -30°C to +120°C

Cable/Connector: -40°C to +105°C

Vibration Resistance: Up to 20g (50Hz)

Pressure Rating: 4 MPa (40 bar)

Calibration & Target
Target Material: AISI 4140 steel (default calibration)

Linear Range: Middle 60% of full scale (~0.3–0.7mm for 1.0mm range)

Recommended Gap Voltage: -10V DC

Compatibility & Options
Cable Length: 5m or 9m (integrated or with CON021 connector)

Works With: EPRO MMS6000 monitoring systems

Compliance: API 670, ISO 10816

Typical Applications
Shaft vibration monitoring (turbines, compressors)

Thrust bearing position measurement

Industrial pump/fan condition monitoring

SERVICE HOTLINE 400-887-3214

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： 615739355

Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司吉ICP备2024020526号-1