MMS6210_EPRO_PRODUCT_Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司

Key Features: Multi-parameter monitoring (6-12 channels, expandable) Supports all EPRO sensor types (eddy current, velocity, accelerometers) High-speed data acquisition (25.6kHz/channel) Advanced diagnostic capabilities with waveform/spectrum analysis Flexible communication interfaces (Modbus, PROFIBUS, Ethernet) Web-based configuration and monitoring Technical Specifications: Compliant with API 670, ISO 7919 and ISO 10816 standards Wide measurement ranges for vibration, position and speed Configurable alarm setpoints with dynamic adaptation 85-264VAC or 24VDC power supply options Operating temperature range: -30°C to +70°C Typical Applications: Power generation turbines Oil & gas compressors Critical pumps and motors Rotating machinery in hazardous areas (ATEX option) System Benefits: Early fault detection through continuous monitoring Reduced downtime with predictive maintenance Flexible integration with control systems Rugged design for harsh environments The MMS6210 combines EPRO's proven reliability with advanced monitoring technology, making it ideal for protecting high-value assets in demanding industrial environments.

400-887-3214

DESCRIBE

General Specifications
Model: MMS6210

Type: Multi-channel vibration monitoring system

Application: Continuous machinery protection (turbines, compressors, pumps)

Standards Compliance: API 670, ISO 7919, ISO 10816

Certifications: ATEX/IECEx (optional), CE, SIL 2

Monitoring Capabilities
Channels: Configurable for 6-12 measurement points (expandable)

Measurement Types:

Vibration: Shaft relative/absolute, casing seismic

Position: Axial thrust, eccentricity

Speed: RPM via keyphasor

Process Parameters: Temperature, pressure (optional)

Sensor Compatibility
Eddy Current Probes: 5mm/8mm/11mm (PR642x series)

Velocity Sensors: 4-20mA seismic transducers

Accelerometers: IEPE or 4-20mA

Proximity Probes: For position monitoring

Signal Processing
Frequency Range:

Vibration: 0.1 Hz – 10 kHz

Position: DC – 1 kHz

Sampling Rate: 25.6 kHz/channel

Dynamic Range: 120 dB

Filters:

High-pass/Low-pass (software-configurable)

Notch filters for harmonic elimination

Alarm & Protection
Programmable Setpoints:

4 levels per channel (Alert/Danger with delay)

Dynamic alarm adaptation for run-up/coast-down

Relay Outputs: 8 configurable SPDT relays (250VAC/5A)

Communication Interfaces
Analog Outputs: 16 channels (4-20mA/±10V)

Digital Protocols:

Modbus RTU/TCP

PROFIBUS-DP

OPC UA (optional)

Ethernet: 10/100 Mbps for web interface

Power Supply
Voltage: 85-264 VAC, 47-63 Hz or 24 VDC

Consumption: ≤50 W (fully loaded)

Environmental Specifications
Operating Temperature: -30°C to +70°C

Humidity: 5-95% RH (non-condensing)

Enclosure: IP52 (standard), IP65 (optional)

Mechanical Details
Mounting: 19" rack (4U) or panel mount

Dimensions: 482 × 177 × 350 mm (W×H×D)

Weight: ≈12 kg

Key Advantages
✔ Multi-parameter monitoring in a single system
✔ Advanced diagnostics with waveform/spectrum capture
✔ Redundant architecture for critical applications
✔ Web-based configuration for remote access

Typical Applications
Power plant turbine supervisory systems

Offshore compressor monitoring

Petrochemical critical machinery protection

Integrated condition monitoring solutions