PR6423/000-040_EPRO_PRODUCT_Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司

Key Features: Sensitivity: 4.0 mV/µm (optimized for wider measurement ranges) Measurement Range: 0 to 2.0 mm (2000 µm) Output: -2 to -20V DC (linear analog signal) Frequency Response: 0–10 kHz (suitable for dynamic vibration analysis) Robust Design: Operates in -30°C to +120°C environments Typical Applications: Shaft vibration monitoring in turbines & compressors Axial position measurement (thrust monitoring) Condition-based maintenance systems Compatibility: Integrates with EPRO MMS6000 monitoring systems Standard 8mm probe with CON021 connector options

400-887-3214

DESCRIBE

General Specifications
Type: Eddy current displacement sensor (non-contact)

Application: Vibration/shift monitoring in turbines, compressors, pumps

Electrical Characteristics
Sensitivity: 4.0 mV/µm (standard for -040 suffix)

Measurement Range: 0 to 2.0 mm (2000 µm, linear range typically ±1mm from calibration point)

Output Signal: -2 to -20V DC (proportional to gap distance)

Frequency Response: 0 to 10 kHz

Power Supply: -24V DC (typical for EPRO sensors)

Mechanical/Environmental
Probe Diameter: 8 mm

Operating Temp: -30°C to +120°C (sensor head)

Cable: Integrated or connectorized (e.g., CON021), common lengths 5m/9m

Target Material: Ferrous steel (requires recalibration for other metals)

Calibration
Linear Range: Middle 60% of full range (e.g., 0.5–1.5mm for 2mm range)

Factory Calibrated: For specified sensitivity (4.0 mV/µm)

Compatibility
Works with: EPRO MMS6000 monitoring systems

Connector Options: CON011/CON021 (if detachable)

SERVICE HOTLINE 400-887-3214

Mail jilineasyyi@outlook.com ADDRESS Unit 12, 20th Floor, Good View Commercial Centre, 2-16 Garden Street, Mong Kok, Hong Kong

Q Q： 615739355

Easy Semiconductor Technology (Hong Kong) Limited 易擇半導體科技(香港)有限公司吉ICP备2024020526号-1