General Specifications:
Model: PDC24G0200E3RS

Type: 24V DC Industrial Power Distribution Unit

Input Voltage: 24V DC (nominal)

Output Channels: 20A total capacity (configurable per channel)

Mounting: DIN Rail (TS35/7.5 or 15)

Electrical Parameters:
Input:
Rated Voltage: 24V DC (18–32V DC range)

Max Input Current: 20A (depends on load distribution)

Polarity Protection: Reverse polarity protected

Inrush Current: ≤30A (typical)

Output:
Number of Outputs: Configurable (e.g., 8× 2.5A, 4× 5A, etc.)

Output Current per Channel: Adjustable (e.g., 0.5A–10A per terminal)

Short-Circuit Protection: Electronic fuse (auto-reset or manual reset)

Overload Protection: Per-channel current limiting

Mechanical & Environmental:
Terminals:

Input: Screw terminals (4–6 mm² wire)

Output: Spring-clamp or screw terminals (0.5–2.5 mm²)

Housing Material: Flame-retardant plastic (UL94 V-0)

Protection Rating: IP20 (basic finger-safe)

Operating Temperature: -25°C to +60°C

Storage Temperature: -40°C to +85°C

Humidity: 5–95% RH (non-condensing)

Safety & Compliance:
Standards:

IEC/EN 60947-7-2 (terminal blocks)

UL 508 (industrial control equipment)

CE, RoHS, REACH

Isolation Voltage: 500V (input-to-output)

Dielectric Strength: 2.5kV AC (1 min, input-to-output)

Key Features:
✔ Modular Design: Expandable with additional PDC units
✔ LED Indicators: Per-channel status (power, fault)
✔ Hot-Swappable Fusing: Replaceable fuse modules
✔ Wide Voltage Range: Supports 18–32V DC input

Applications:
Industrial control panels

PLC & automation systems

24V DC machine power distribution