ABB ACS800-04-0030-3+D150+P901 Technical Parameters 1. Power Specifications Rated Power: 30 kW (40 HP) Input Voltage: 3-phase 380-500V AC (-15%/+10%) Output Current: 60 A (continuous) Overload Capacity: 110% continuous 150% for 60 sec Efficiency: 98.5% (typical at full load) 2. Control Performance Control Method: Direct Torque Control (DTC) Speed Accuracy: ±0.01% of setpoint (encoderless) Torque Accuracy: ±1% of rated torque Switching Frequency: 1-4 kHz (adjustable) 3. Braking System (P901) Brake Chopper: Integrated Continuous Braking Power: 30 kW Peak Braking Power: 45 kW (60 sec) External Resistor Required: Yes 4. Control Panel (D150) Display: 7" color TFT touchscreen Languages: 20 pre-installed Data Logging: 1000 events Interface: USB for parameter transfer 5. Communication Standard: RS485 (Modbus RTU) Ethernet (TCP/IP) Optional Fieldbus: PROFIBUS DP-V1 PROFINET IRT EtherNet/IP 6. Protection Features Electrical: Short-circuit (IGBT protection) Ground fault detection DC bus monitoring Thermal: Motor thermal model Heatsink temperature control 7. Physical Parameters Dimensions (Drive): 482H × 245W × 227D mm Weight: 32 kg (complete system) Cooling: Forced air (filtered) Ambient Temperature: 0-40°C (32-104°F) 8. Compliance Standards Safety: SIL3/PL e (ISO 13849-1) EMC: IEC 61800-3 Category C3 Certifications: CE, UL, cULus, DNV GL