The Schneider Electric ComPacT NSX250N Molded Case Circuit Breaker is a three‑pole (3P) low‑voltage protective device designed for electrical distribution systems in industrial and commercial applications.

The Schneider Electric EZD400E 3‑Pole 400 A Molded Case Circuit Breaker (MCCB) is a low‑voltage protective device designed for industrial and commercial electrical distribution systems.

The Schneider Electric Acti9 iC65N 2‑Pole C32A Miniature Circuit Breaker (MCB) is a compact low‑voltage protective device designed for electrical distribution and circuit protection in residential, commercial, and light industrial applications.

The Schneider Electric Acti9 iDPN H Vigi RCBO (Residual Current Breaker with Overcurrent Protection) — 1P+N, C‑curve, 25 A is a combined protective device that integrates overload and short‑circuit protection with earth‑leakage (residual current) protection in a single modular unit. It is designed for low‑voltage AC distribution systems and ideal for use in residential, commercial, and industrial electrical panels where both circuit protection and safety against earth faults are required.

The Schneider Electric Acti9 iID Residual Current Circuit Breaker (RCCB) is a 4‑pole (4P) safety device designed to protect low‑voltage AC electrical systems by detecting earth‑leakage (residual) currents and automatically disconnecting the circuit when a leakage current above the set threshold occurs.

The Schneider Electric C65H‑DC 2‑Pole C32A Miniature Circuit Breaker is a compact DC protective device intended for use in low‑voltage direct current (DC) electrical circuits. It provides reliable overload and short‑circuit protection by combining a thermal‑magnetic trip unit with a C‑curve characteristic, making it suitable for circuits with moderate inrush currents.

The Schneider Electric LAG8N11 auxiliary contact block is an accessory module designed to provide additional signaling contacts for contactors in the TeSys Giga series. It mounts on the side of a contactor and adds one normally open (NO) and one normally closed (NC) auxiliary contact.

The Schneider Electric EasyPact EZD160E 3‑Pole 160 A MCCB (Molded Case Circuit Breaker) is a robust low‑voltage protective device designed for industrial and commercial AC power distribution systems.

The Schneider Electric WNTS100B/4AV is a high‑current manual electrical switch‑disconnect / safety isolator designed for low‑voltage three‑phase electrical systems.

The Schneider Electric EasyPact EZD400E 3‑Pole 320 A Molded Case Circuit Breaker (MCCB) is a robust low‑voltage protective switching device designed for industrial and commercial AC power distribution.

The Schneider Electric iST 65 4‑Pole Surge Protective Device is a fixed Type 2 surge arrester used in low‑voltage AC electrical distribution boards to protect against transient overvoltages caused by lightning strikes, switching surges, and other electrical disturbances

The Schneider Electric ComPacT NSX100F 4‑Pole Molded Case Circuit Breaker (MCCB) is a robust low‑voltage protective device used in electrical distribution systems for overload, short‑circuit protection, manual switching, and isolation of three‑phase circuits.