EPRO

Key Features: • Multi-Parameter Monitoring: ✓ Vibration (velocity/displacement) ✓ Shaft position ✓ Speed/RPM ✓ Temperature • Advanced Diagnostics: Real-time FFT/waveform analysis • Scalable Architecture: Expandable channel capacity Technical Specifications: Input Channels: 16 fully configurable Sensor Compatibility: • Eddy current probes (PR642x/PR9268) • Velocity sensors (4-20mA/0-10V) • IEPE accelerometers • Tachometer inputs Accuracy: ±0.5% FS Sampling Rate: 1kHz/channel System Integration: ✓ 16x isolated 4-20mA outputs ✓ 32 programmable alarm relays ✓ Ethernet + Modbus RTU + OPC UA ✓ Redundant power supply option Industrial Design: Rack-mounted (IP20) -20°C to +70°C operation 19" standard cabinet installation Typical Applications: Power plant turbine monitoring Offshore compressor trains Large rotating equipment arrays Compliance: API 670, ISO 10816, CE, UL Special Capabilities: Predictive maintenance analytics Remote monitoring via OPC UA Customizable alarm strategies

150

EPRO

Key Specifications: • Measurement Range: 0-20 mm/s RMS • Frequency Range: 10Hz-1kHz (ISO 10816 compliant) • Accuracy: ±1% FS • Output: 4-20mA (isolated) I/O Configuration: ✓ 1x velocity sensor input ✓ 2x alarm relays (SPDT) ✓ LED status indicators Electrical & Mechanical: Power: 24V DC (±10%) Operating Temp: -20°C to +70°C Protection: IP40 Mounting: DIN-rail Setup & Operation: • DIP switch configuration (no software needed) • Plug-and-play installation Typical Applications: Pump/motor vibration monitoring Fan/blower protection Standalone equipment guarding Compliance: ISO 10816, CE, UL Special Features: Compact, cost-effective solution Easy to install and maintain No external power required for sensors

859

EPRO

Key Specifications: • Sensitivity: 10.0 mV/µm (±5%) • Measurement Range: 0-1.0mm (1000µm) • Frequency Response: DC to 10kHz • Temp Range: -40°C to +175°C (peak 200°C) Extreme-Environment Design: ✓ 11mm ruggedized probe ✓ M14×1.5 threaded mounting ✓ 6MPa pressure rating ✓ 25g vibration resistance ✓ Optional IP68 protection Measurement Performance: Target: AISI 4140 steel Linear range: 0.3-0.7mm Accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 systems • High-temp mineral-insulated cable • ATEX/IECEx options available Typical Applications: Gas turbine hot section monitoring Steam turbine high-pressure stages Offshore compressor protection

165

EPRO

Key Specifications: • Sensitivity: 8.0 mV/µm (±5%) • Measurement Range: 0-1.0mm (1000µm) • Frequency Response: DC to 10kHz • Output: -2 to -20V DC linear signal Robust Design: ✓ 8mm diameter probe ✓ M10×1 threaded mounting ✓ -30°C to +120°C operation ✓ 20g vibration resistance ✓ 4MPa pressure rating Measurement Performance: Target material: AISI 4140 steel Linear range: 0.3-0.7mm (60% of full scale) Accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 systems • Standard 5m/9m cable options • CON021 quick-disconnect available Typical Applications: Turbine shaft vibration monitoring Compressor thrust position measurement Industrial pump/fan protection Compliance: Meets API 670 and ISO 10816 standards Special Features: Reliable performance in harsh industrial environments Standard configuration for general monitoring applications Easy installation and maintenance

669

EPRO

Key Specifications: • Sensitivity: 4.0 mV/µm (±5%) • Measurement Range: 0-2.0mm (2000µm) • Frequency Response: DC to 10kHz • Temp Range: -40°C to +200°C (peak 250°C) High-Temp Design Features: ✓ 8mm high-temperature probe ✓ M10×1 threaded mounting ✓ Mineral-insulated cable (5m standard) ✓ 20g vibration resistance ✓ 4MPa pressure rating Measurement Performance: Target: AISI 4140 steel Linear range: 0.6-1.4mm Accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 systems • Requires high-temp cabling • API 670 compliant Typical Applications: Gas turbine hot section monitoring Steam turbine shaft vibration High-temperature compressor trains

643

EPRO

Key Specifications: • Sensitivity: 8.0 mV/µm (±5%) • Measurement Range: 0-1.0mm (1000µm) • Frequency Response: DC to 10kHz • Output: -2 to -20V DC linear signal Robust Design: ✓ 8mm probe diameter ✓ M10×1 threaded mounting ✓ -30°C to +120°C operation ✓ 20g vibration resistance ✓ IP67 protection (optional) Measurement Performance: Target material: AISI 4140 steel Linear range: 0.3-0.7mm Accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 systems • Standard 5m/9m cable options • CON021 quick-disconnect available Typical Applications: Turbine/compressor shaft monitoring Pump and fan bearing protection General industrial machinery Compliance: Meets API 670 and ISO 10816 standards Special Features: /011 variant features enhanced sealing Reliable performance in harsh conditions Easy installation and maintenance

369

EPRO

Core Function: High-temperature eddy current sensor designed for extreme environment displacement monitoring in critical rotating equipment. Key Specifications: • Sensitivity: 8.0 mV/µm (±5%) • Measurement Range: 0-1.0mm (1000µm) • Frequency Response: DC to 10kHz • Temperature Range: -40°C to +200°C (peak 250°C) High-Temp Design Features: ✓ 8mm high-temperature probe ✓ M10×1 threaded mounting ✓ Mineral-insulated cable (5m standard) ✓ 20g vibration resistance ✓ 4MPa pressure rating Measurement Performance: Target material: AISI 4140 steel Linear range: 0.3-0.7mm (60% of full scale) Accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 systems • Special high-temp cable required • API 670 compliant Typical Applications: Gas turbine hot section monitoring Steam turbine high-temperature zones Petrochemical compressor trains

52

EPRO

Key Specifications: • Sensitivity: 8.0 mV/µm (±5%) • Measurement Range: 0-1.0mm (1000µm) • Frequency Response: DC to 10kHz • Output: -2 to -20V DC linear signal Mechanical Design: ✓ 8mm diameter probe ✓ M10×1 threaded mounting ✓ Operating temperature: -30°C to +120°C ✓ Vibration resistance: 20g (50Hz) Measurement Performance: Target material: AISI 4140 steel Linear range: 0.3-0.7mm (60% of full scale) Accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 monitoring systems • Standard 5m/9m cable options • CON021 quick-disconnect available Typical Applications: Turbine shaft vibration monitoring Compressor thrust position measurement Industrial pump/fan protection Compliance: Meets API 670 machinery protection standards Special Features: Optimized for standard-range displacement measurements Rugged industrial construction Reliable performance in harsh environments

960

EPRO

Core Function: Industrial eddy current sensor for wide-range displacement monitoring in heavy rotating equipment. Key Specifications: • Sensitivity: 1.4 mV/µm (±5%) • Extended Range: 0-14mm (14,000µm) • Frequency Response: DC to 10kHz • Output: -2 to -20V DC linear signal Mechanical Configuration: ✓ 8mm diameter probe ✓ M10×1 threaded mounting ✓ -30°C to +120°C operation ✓ 20g vibration resistance Measurement Performance: Target material: AISI 4140 steel Linear range: 4.2-9.8mm (60% of full scale) Typical accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 systems • Standard 5m/9m cable options • CON021 quick-disconnect available Special Features: Optimized for large clearance applications Maintains stability in high-vibration environments Wide linear measurement range Typical Applications: Large turbine shaft monitoring Heavy compressor axial displacement Industrial machinery with wide gaps Compliance: Meets API 670 machinery protection standards

64

EPRO

Key Specifications: • Sensitivity: 8.0 mV/µm (±5%) • Measurement Range: 0-1.0mm (1000µm) • Frequency Response: DC to 10kHz • Output: -2 to -20V DC linear signal Robust Design Features: ✓ 8mm industrial-grade probe ✓ M10×1 threaded mounting ✓ -30°C to +120°C operation ✓ 20g vibration resistance ✓ 4MPa pressure rating Measurement Performance: Target material: AISI 4140 steel Linear range: 60% of full scale Accuracy: ±1% FS System Integration: • Compatible with EPRO MMS6000 systems • 5m high-flexibility shielded cable (standard) • CON021 quick-disconnect option Special Features: /10R designation indicates ruggedized construction Enhanced cable durability for harsh environments Reliable performance in high-vibration applications Typical Applications: Turbine shaft vibration monitoring Compressor thrust position measurement Heavy industrial machinery protection Compliance: Meets API 670 machinery protection standards

777

EPRO

Key Features: • Modular Design: Scalable from 4 to 12 channels • Multi-Parameter Monitoring: ✓ Vibration (velocity/displacement) ✓ Shaft position ✓ Speed/RPM ✓ Temperature (RTD/TC) Technical Specifications: Input Compatibility: • Eddy current probes (PR642x/PR9268) • Velocity sensors (4-20mA/0-10V) • Tachometers (5-15V pulse) • RTDs/thermocouples Accuracy: ±1% FS Sampling Rate: 1kHz/channel Communication & Outputs: ✓ 4-20mA analog outputs (per channel) ✓ Programmable alarm relays ✓ RS-485 Modbus + Ethernet ✓ Optional Profibus-DP System Integration: CMS 2000 configuration software Rack-mounted IP20 enclosure -20°C to +70°C operation Typical Applications: Power plant turbine supervision Large compressor train monitoring Critical generator protection Compliance: API 670, ISO 10816, CE, UL certified Advantage: Flexible expansion capability for growing monitoring needs (Ideal for centralized plant-wide machinery protection systems)

734

EPRO

Key Specifications: • Channels: 2 fully independent DSP-processed inputs • Measurement Ranges: Vibration: 0-500 µm pk-pk Displacement: 0-2.0 mm Speed: 0-20,000 RPM • Accuracy: ±0.5% FS • Sampling Rate: 2kHz/channel Advanced Features: ✓ Digital signal processing (DSP) technology ✓ Real-time waveform capture ✓ Predictive maintenance diagnostics ✓ Ethernet/IP & Modbus RTU communication I/O Configuration: 2x isolated 4-20mA outputs 4x alarm relays (SPDT) RS-485 + Ethernet standard Environmental Ratings: Power: 24V DC or 100-240V AC Operating Temp: -20°C to +70°C Enclosure: IP40 panel-mount Typical Applications: Steam/gas turbine supervisory systems Critical compressor protection Power generation equipment Compliance: API 670, ISO 10816, CE, UL Special Notes: "D" model features enhanced digital processing Supports CMS 2000 configuration software Optional ATEX versions available

330