The TM1SHTCC4 is a single-hole power connector plug from Schneider Electric's Harmony component series. It is a standardized, compact, and safety-conscious connector designed for providing a reliable and touch-safe electrical connection for power distribution and control devices.

The ABE7H16S43 is an auxiliary contact block (also known as an add-on contact or signaling contact block) from Schneider Electric's Harmony component series. It is designed to be mechanically attached to the side of compatible TeSys D-line contactors and starters (such as the LC1D series) to provide additional normally open (NO) and normally closed (NC) contacts for control and signaling circuits.

The TM200CE40R is a general-purpose electromechanical relay from Schneider Electric's Harmony control relay series. It is designed as a compact and versatile switching device for industrial and commercial control circuits, capable of handling both AC and DC loads.

The TM172PDG28RI is a multi-function, DIN rail mounted digital timer relay from Schneider Electric's Harmony control relay series. It is designed to provide precise and reliable time-delay functions for a wide range of industrial automation and control applications.

The TM2AMI4LT is a compact analog input/output (I/O) module from Schneider Electric's Modicon TM2 modular I/O system. It is designed for use with Modicon M221 and M241 logic controllers to expand their analog signal handling capabilities directly on the controller's bus, without the need for a separate network.

The TM2AMI4HTN is an analog input/output (I/O) expansion module from Schneider Electric's Modicon TM2 modular I/O system, designed for use with Modicon M221 and M241 series programmable logic controllers (PLCs). It expands the controller's analog signal handling capabilities via a direct, high-speed bus connection.

The VW3M2207 is an optional communication interface card designed for Schneider Electric's Altivar Process ATV600 series of variable speed drives (VSDs). This module enables the drive to communicate on EtherNet/IP industrial networks.

The MTZ DM2315 is a Digital Micrologic 2.3 electronic trip unit designed for Schneider Electric's MasterPact MTZ series of air circuit breakers. It serves as the intelligent "brain" of the breaker, providing advanced protection, measurement, and communication capabilities for electrical distribution systems.

The TM172PDG28R is a digital, multi-function timer relay from Schneider Electric's Harmony control relay series. It is designed for DIN rail mounting and provides precise, programmable time-delay control for a wide variety of industrial automation applications.

The LC1D128E7C is a three-pole electromechanical contactor from Schneider Electric's TeSys D series. Designed for reliable motor switching and power control, it is widely used in industrial and commercial applications for starting, stopping, and controlling three-phase motors, as well as switching resistive or inductive loads such as heating, lighting, and capacitors.

The LC1DWKM7C is a pre-assembled reversing contactor kit from Schneider Electric's TeSys D series. It is designed for bidirectional (forward/reverse) control of three-phase motors in a compact, integrated package.

The TM172PBG07R is a digital, multi-function timer relay from Schneider Electric's Harmony control relay series. It is designed for DIN rail mounting and provides precise, programmable time-delay control for a wide variety of industrial automation applications.