The Schneider Electric iPRU 20 2P 20kA is a Surge Protective Device (SPD) / Type 2 Surge Arrester from the Acti9 iPRU series, designed to protect electrical installations and sensitive equipment against transient overvoltages caused by lightning strikes and switching operations.

The Schneider Electric WATSNB-100/100-4CBR is a Medium Voltage Active Harmonic Filter from the Accusine series, designed for high-performance harmonic mitigation and power quality improvement in industrial and large commercial electrical systems. This specific configuration represents a sophisticated, four-quadrant compensation system.

The Schneider Electric XB2-BSM4LC is a Momentary Push Button from the Harmony XB2 series, featuring a square button with blue LED illumination. It is designed for general-purpose control applications in industrial and commercial panels where both manual control and visual indication are required.

The Schneider Electric XB2-BVB4LC is a Contact Block from the Harmony XB2 series, designed to provide electrical contacts for push button operators. It is a modular accessory that attaches behind various XB2 push button actuators to convert mechanical action into electrical switching functions.

The Schneider Electric NSX630S 3P 630A is a High-Current Air Circuit Breaker (ACB) from the Masterpact NSX series, designed for main power distribution and protection in large commercial, industrial, and critical infrastructure applications. The "S" designation indicates a Selective version with enhanced coordination capabilities.

The Schneider Electric LX9FG110 is a specific contactor coil designed for use with TeSys F series contactors such as LC1F185 and LC1F225. This low‑consumption AC coil operates over a wide frequency range and offers high tolerance to voltage drops, ensuring stable and reliable actuation of the associated contactor.

The Schneider Electric WATSN16A/160A 4‑Pole Automatic Transfer Switch (ATS) is a robust low‑voltage power transfer device designed to switch electrical loads between two independent power sources, such as a utility supply and a standby generator, in three‑phase AC systems

The Schneider Electric WATSN160B/4A Automatic Transfer Switch (ATS) is a four‑pole changeover device used in low‑voltage AC power systems to ensure continuity of electrical supply. It performs automatic and manual switching between two independent power sources, such as a utility mains and a standby generator, to maintain uninterrupted power to connected loads during supply disturbances.

The Schneider Electric WATSN125/4A 4‑Pole 125 A Automatic Transfer Switch (ATS) is a robust low‑voltage changeover device designed for three‑phase AC power systems.

The Schneider Electric WATSN63/4A Automatic Transfer Switch (ATS) is a four‑pole changeover device designed for low‑voltage AC electrical systems. It provides automatic and manual switching between a primary power source (such as utility mains) and a secondary power source (for example, a standby generator) to ensure continuous power supply to connected loads during power disturbances or failures.

The Schneider Electric Modicon TM218LDA40DRPHN is a programmable logic controller (PLC) from the Modicon M218 series designed for compact machine automation and control applications.

The Schneider Electric WATSN 4‑pole 250 A Automatic Transfer Switch (ATS) is a dual‑power source changeover device designed for low‑voltage AC electrical systems.