The Schneider Electric Acti 9 Vigi C120 4P 30mA is a 4-pole (3P+N), 30mA sensitivity Residual Current Device (RCD/RCCB) from the premium C120 series. It is a pure earth leakage protection device designed to be installed in series with circuit breakers (MCBs/MCCBs) to provide protection against electric shock and fire risks caused by insulation faults in three-phase electrical installations.

The Schneider Electric NSX250F DC 3P 250A is a 3-pole, 250A, fixed-type molded case circuit breaker (MCCB) from the Compact NSX series, specifically engineered for Direct Current (DC) applications.

The Schneider Electric CVS100F 4P 50A is a 4-pole (3-phase + neutral), 50A, fixed-type molded case circuit breaker from the CVS series. Designed for robust performance in industrial and commercial applications, it provides reliable overload and short-circuit protection for three-phase four-wire systems where neutral protection or full circuit isolation is required. The "F" designation indicates a fixed mounting version.

The Schneider Electric GV2PM10C is a compact, 10A rated, Type C Motor Starter Protector (MSP) – a combined disconnect switch, short-circuit protector, and thermal overload relay. It is part of the renowned Telemecanique GV2 series, designed to provide complete and compact protection for small three-phase motors in industrial and commercial applications.

The Schneider Electric EZD160E 3P 63A is a 3-pole, 63A, E-frame molded case circuit breaker from the EZD series. Designed as a compact and economical protective device, it provides reliable overload and short-circuit protection for three-phase circuits in commercial and industrial distribution systems.

The Schneider Electric NSX100N 3P 40A 2.2 is a 3-pole, 40A molded case circuit breaker (MCCB) from the Compact NSX series. The "N" indicates it is equipped with a standard thermal-magnetic (TM-D) trip unit, and the "2.2" suffix denotes a specific breaking capacity variant. It provides reliable and cost-effective overload and short-circuit protection for three-phase circuits in commercial and light industrial applications.

The Schneider Electric PRD1 12.5 3P+N is a Type 1 (Class I) Surge Protective Device designed for installation at the service entrance of three-phase electrical systems

The Schneider NSX160N 3P 150A 2.2 is a 3-pole Moulded Case Circuit Breaker (MCCB) designed to provide reliable protection for electrical circuits in low-voltage systems.

The Schneider IC65N 4P D20A is a 4-pole Miniature Circuit Breaker (MCB) designed for the protection of electrical circuits against overload and short circuits. It is part of the IC65N series, which is widely known for its reliability and performance in both residential and industrial electrical installations.

The Schneider GB/T 18802.11 20KA is a surge protective device (SPD) designed according to the GB/T 18802.11 standard for electrical installations. This device is intended to protect electrical circuits and equipment from voltage spikes caused by lightning strikes or other transient voltage surges.

The Schneider IPRD1 25 3P+N is an earth leakage relay (also known as a residual current device or RCD) designed to provide earth fault protection for electrical circuits in low-voltage installations.

The Schneider EA9RN3C320CA is a three-phase miniature circuit breaker (MCB) designed for overload and short-circuit protection in low-voltage electrical systems.