The Schneider Electric ComPacT NSX250H Molded Case Circuit Breaker (MCCB) is a low‑voltage protective device designed for industrial and commercial electrical distribution systems. It provides reliable protection against overloads, short circuits, and other electrical faults. The NSX250H series is part of Schneider Electric’s ComPacT NSX new generation architecture and is suitable for use as a main or feeder circuit breaker. It can be configured with various trip units (thermal‑magnetic or electronic) to match specific protection and coordination requirements, and is compliant with international safety and performance standards.

The Schneider Electric Altivar Easy 610 Variable Frequency Drive (VFD) – ATV610D30N4 is a compact industrial inverter designed to control three‑phase asynchronous and synchronous motors. It provides reliable speed and torque regulation for applications such as fans, pumps, compressors, and conveyors. The drive features an integrated EMC filter for reduced electromagnetic interference, a wide output frequency range, and multiple preset speeds to simplify commissioning and operation. It is suitable for cabinet‑mounted installation and supports flexible motor control with adjustable parameters for optimized performance in general industrial environments

The Schneider Electric HVX12‑31‑12/K (HVX EP Series) Vacuum Circuit Breaker is a medium‑voltage circuit protection device designed for use in 12 kV AC power distribution networks. It uses vacuum interrupter technology to switch and interrupt fault currents in three‑phase systems with high reliability and minimal contact wear. This breaker is suitable for indoor switchgear applications and industrial or utility networks, offering draw‑out or fixed configurations, robust insulation, and strong breaking capability. It is engineered to help protect distribution lines, transformers, generators, and other critical electrical equipment from overloads and short circuits through rapid interruption of fault currents.

The Schneider Electric HVX 12‑25‑06/E 210 Vacuum Circuit Breaker is a medium‑voltage protective device designed for use in 12 kV AC power distribution systems. It employs vacuum interrupter technology to interrupt and make electrical circuits reliably under load and fault conditions with minimal contact wear, high dielectric strength, and fast arc extinction. The breaker is suitable for indoor switchgear applications and can be configured as a withdrawable (draw‑out) or fixed mounted unit within metal‑clad or metal‑enclosed switchgear. This type of breaker is commonly used to protect feeders, transformers, bus sections, and other critical assets in utility and industrial power distribution networks.

The Schneider Electric EasyPact MVS12N Medium‑Voltage Molded Case Circuit Breaker (ACB) is a robust industrial circuit breaker designed for low‑voltage power distribution systems. It provides reliable protection against overloads and short circuits in commercial, industrial, and infrastructure electrical installations. The MVS family combines high breaking capacity with modular trip unit options and conforms to international protection standards (IEC 60947‑2). This breaker is suitable for panelboards, switchboards, and power distribution frames requiring dependable protection and flexibility in coordination.

The Schneider Electric HVX12‑25‑06/E 210 Vacuum Circuit Breaker is a medium‑voltage protective device designed for use in 12 kV AC power distribution systems. It employs vacuum interrupter technology to rapidly and safely interrupt electrical faults such as overloads and short circuits in three‑phase systems. This breaker is intended for indoor switchgear and offers reliable performance, long electrical and mechanical life, and compatibility with standard MV distribution switchgear. The “/E” indicates a withdrawable (draw‑out) configuration, and the 210 refers to the pole center distance (210 mm) suited to its frame and installation requirements. The HVX series supports various current ratings and short‑circuit capabilities for flexible system design.

The Tmax T2H 160 A Molded Case Circuit Breaker is a low‑voltage industrial protection device designed for power distribution and motor protection. It is part of the Tmax T series MCCB family widely used in commercial and industrial electrical panels. This breaker provides reliable protection against overload, short‑circuit, and fault conditions, with a compact design for panel mounting. It features fixed front terminals and a thermal‑magnetic or electronic trip release, allowing adjustable protection settings for enhanced coordination with upstream and downstream devices. Rated for wide voltage ranges and high interrupting capacity, this breaker meets international safety standards and is suitable for main, feeder, or branch circuit protection.

Schneider Electric EasyPact EVS40H Air Circuit Breaker is a low-voltage power distribution circuit breaker designed for protection of electrical distribution systems and connected loads. It is suitable for medium-power installations such as commercial, industrial and infrastructure applications. The EVS40H series offers high breaking capacity, adjustable electronic trip unit options, and reliable short-circuit and overload protection, complying with IEC/IEC standards.

Schneider Electric EasyPact EVS32H is a low-voltage air circuit breaker designed for protection and control of power distribution systems in commercial, industrial, and infrastructure applications. It provides reliable protection against overload, short-circuit and earth-fault conditions when equipped with an electronic trip unit. The EVS32H family features high breaking capacity, electronic adjustable trip settings, and robust mechanical construction. It supports fixed and draw-out installation configurations and complies with IEC low-voltage circuit breaker standards.

Schneider Electric EasyPact EVS25H is a 3-pole low-voltage air circuit breaker designed for protection and control of electrical power distribution systems in commercial, industrial, and infrastructure applications. It delivers reliable protection against overloads, short-circuits, and earth-faults with electronic trip unit options. The EVS25H features high breaking capacity, adjustable electronic trip settings, and a rugged construction suitable for demanding electrical environments. It supports fixed or draw-out installation configurations and complies with international low-voltage circuit breaker standards

Schneider Electric EasyPact EVS20H is a low-voltage air circuit breaker designed for protection and control of power distribution systems in commercial, industrial and infrastructure applications. It provides reliable protection against overloads, short-circuits and earth-faults when equipped with an electronic trip unit. The EVS20H features high breaking capacity, electronic adjustable protection settings, and robust mechanical construction. It supports fixed or draw-out installation configurations and complies with IEC low-voltage circuit breaker standards.

Schneider Electric EasyPact EVS16H is a 4-pole low-voltage air circuit breaker designed for protection and control of power distribution systems in commercial, industrial, and infrastructure applications. It provides reliable protection against overloads, short-circuits and earth-faults when equipped with an electronic trip unit. The EVS16H family features high breaking capacity, adjustable electronic protection settings, and a robust mechanical design suitable for demanding electrical environments. It supports fixed or draw-out installation configurations and complies with international low-voltage circuit breaker standards.