The Schneider Electric WATSNB-100/100-4CBR is a Medium Voltage Active Harmonic Filter from the Accusine series, designed for high-performance harmonic mitigation and power quality improvement in industrial and large commercial electrical systems. This specific configuration represents a sophisticated, four-quadrant compensation system.

The Schneider Electric XB2-BSM4LC is a Momentary Push Button from the Harmony XB2 series, featuring a square button with blue LED illumination. It is designed for general-purpose control applications in industrial and commercial panels where both manual control and visual indication are required.

The Schneider Electric XB2-BVB4LC is a Contact Block from the Harmony XB2 series, designed to provide electrical contacts for push button operators. It is a modular accessory that attaches behind various XB2 push button actuators to convert mechanical action into electrical switching functions.

The Schneider Electric NSX630S 3P 630A is a High-Current Air Circuit Breaker (ACB) from the Masterpact NSX series, designed for main power distribution and protection in large commercial, industrial, and critical infrastructure applications. The "S" designation indicates a Selective version with enhanced coordination capabilities.

The Schneider Electric WATSN160B/4A Automatic Transfer Switch (ATS) is a four‑pole changeover device used in low‑voltage AC power systems to ensure continuity of electrical supply. It performs automatic and manual switching between two independent power sources, such as a utility mains and a standby generator, to maintain uninterrupted power to connected loads during supply disturbances.

The Schneider Electric WATSN125/4A 4‑Pole 125 A Automatic Transfer Switch (ATS) is a robust low‑voltage changeover device designed for three‑phase AC power systems.

The Schneider Electric WATSN63/4A Automatic Transfer Switch (ATS) is a four‑pole changeover device designed for low‑voltage AC electrical systems. It provides automatic and manual switching between a primary power source (such as utility mains) and a secondary power source (for example, a standby generator) to ensure continuous power supply to connected loads during power disturbances or failures.

The Schneider Electric Modicon TM218LDA40DRPHN is a programmable logic controller (PLC) from the Modicon M218 series designed for compact machine automation and control applications.

The Schneider Electric WATSN 4‑pole 250 A Automatic Transfer Switch (ATS) is a dual‑power source changeover device designed for low‑voltage AC electrical systems.

The Schneider Electric WATSG 4P 32A Automatic Transfer Switch (ATS) is a four‑pole dual‑power transfer device designed for low‑voltage AC systems. It ensures automatic or manual switching between two power sources (such as utility and generator) to maintain continuous power supply during mains failures.

The Schneider Electric Acti9 xC60 4‑pole 50 A miniature circuit breaker (MCB) is a low‑voltage protection device designed to safeguard electrical circuits from overload and short‑circuit conditions in three‑phase AC installations.

The Schneider Electric Masterpact MT25N2 is a high‑capacity, low‑voltage frame circuit breaker designed for three‑phase AC power distribution and overcurrent protection in industrial and commercial electrical systems